TY - JOUR T1 - Strategy for salvage pedicle screw placement: A technical note JF - International Journal of Spine Surgery JO - Int J Spine Surg SP - e67 LP - e71 DO - 10.1016/j.ijsp.2013.03.002 VL - 7 AU - Shunsuke Fujibayashi AU - Mitsuru Takemoto AU - Masashi Neo AU - Shuichi Matsuda Y1 - 2013/01/01 UR - http://ijssurgery.com//content/7/e67.abstract N2 - Background Salvage surgery for failed lumbar spine fusion with a loosened pedicle screw is challenging. In general, the strategy includes replacement with larger and longer pedicle screws, augmentation with polymethylmethacrylate cement or hydroxyapatite granules, and extension of fused segments. The purpose of this study is to introduce a new technique for pedicle screw replacement after failed lumbar spine fusion.Methods Five salvage operations were performed using a different trajectory (DT) pedicle screw replacement technique based on 3-dimensional radiological information. Position of the alternative pedicle screws was planned carefully on the computer screen of a computed tomography-based navigation system before the operation. To obtain sufficient initial stability, 1 of 2 techniques was chosen, depending on the patient. One technique created a completely new route, which did not interfere with the existing screw hole, and the other involved penetration of the existing screw hole.Results DT pedicle screws were replaced successfully according to the preoperative plan. In all patients, bony union were achieved at the final follow-up period without any instrument failure. Extension of the fused segments could be avoided by using the DT pedicle screw replacement technique combined with transforaminal lumbar interbody fusion.Conclusions The DT pedicle screw replacement technique is a treatment option for salvage lumbar spine surgery.Clinical relevance The current technique is a treatment option for salvage operations that can both avoid extension of a fused segment and achieve successful bony union. ER -